Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in the Chevrolet Onix

Model: Chevrolet Onix MK 2 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Car stereo

See other generations:
Video tutorial

In today's video tutorial, you will see how to remove and replace the factory radio in the Chevrolet Onix in simple and quick steps. First, get in the vehicle and start by removing the plastic cover located above the radio using a plastic trim tool; then unscrew the mounting screws and disconnect the electrical connectors to remove it, as shown in the video.

Next, install the new Android-type radio; make the necessary modifications to the wiring and reassemble everything, following the video tutorial to the end!


Updated on 15 July 2026 by ScegliAuto


Related tutorials

How to Remove the Factory Radio from the Chevrolet Onix
How to Remove the Factory Radio from the Chevrolet Onix
Chevrolet Onix (2020-2026 / MK 2) Today's main instructions will show you how to disassemble and replace the factory radio of the Chevrolet Onix in simple steps. First, get inside the…
How to Replace the Cabin Filter on a Chevrolet Onix
How to Replace the Cabin Filter on a Chevrolet Onix
Chevrolet Onix (2020-2026 / MK 2) To replace the cabin filter on a Chevrolet Onix, open the glove compartment located on the passenger side. Detach the retaining pins inside the compa…
How to Replace the Headlight Bulb in a Chevrolet Onix?
How to Replace the Headlight Bulb in a Chevrolet Onix?
Chevrolet Onix (2020-2026 / MK 2) To replace the headlight bulb in a Chevrolet Onix, open the hood to access the components inside the engine compartment. At the back of the headlight…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos