Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb in a Chevrolet Onix?

Model: Chevrolet Onix MK 2 - Years 2020-2026
Part: Headlight bulb

To replace the headlight bulb in a Chevrolet Onix, open the hood to access the components inside the engine compartment. At the back of the headlight, you can detach the circular plastic cover located there, allowing access to the internal bulb. The bulb must be disconnected from the appropriate power cable so that the new bulb can be connected. Finally, insert the new bulb into its housing and close everything with the corresponding cover.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Chevrolet Onix
Chevrolet Onix (2020-2026 / MK 2) Today, follow the steps to remove and replace the low beam bulb of the front headlight on the Chevrolet Onix. First, open the hood of your car and st…
How to Replace the Cabin Filter on a Chevrolet Onix
How to Replace the Cabin Filter on a Chevrolet Onix
Chevrolet Onix (2020-2026 / MK 2) To replace the cabin filter on a Chevrolet Onix, open the glove compartment located on the passenger side. Detach the retaining pins inside the compa…
How to Replace the Cabin Interior Light Bulb on the Chevrolet Onix
How to Replace the Cabin Interior Light Bulb on the Chevrolet Onix
Chevrolet Onix (2020-2026 / MK 2) If you want to replace the interior dome light bulb, follow the instructions in this description, and you can also refer to the video. First, access …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos