Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Onix
    4. : How to replace a Chevrolet Onix headlight bulb

Chevrolet Onix - Video tutorial

Model: Chevrolet Onix MK 2 - Years 2020-2024
Part: Headlight bulb
Operation: How to replace a Chevrolet Onix headlight bulb

Let's see today the necessary steps that will allow us to disassemble and replace the low beam bulb of the front headlight of the Chevrolet Onix. First of all, we open the bonnet of our car and start removing the plastic bulb protection cover; then we go to disconnect the electrical connector, then releasing the metal clip, as shown in the video. At this point, remove and replace the bulb with the new one, of the right type and having the same socket; then reassemble everything, hooking the bulb and the connector perfectly!


Posted on 7 May 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Chevrolet Onix 2020-2027 - What does the message "Code 18" indicate in the Chevrolet Onix? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos