Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight on a Chevrolet Onix

Model: Chevrolet Onix MK 2 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tail light

See other generations:
Video tutorial

If you want to proceed with replacing the rear headlight on this car model, the description provided below includes all the necessary steps and useful information for disassembly. First, you need to open the trunk and locate the two screws inside the light assembly and proceed to unscrew them.

Then, you can pull the headlight out by gently pulling it towards you while being careful to disconnect the electrical connector located behind it. Next, take the new light assembly and position it, then reattach the two screws inside.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Chevrolet Onix
Chevrolet Onix (2020-2026 / MK 2) Today, follow the steps to remove and replace the low beam bulb of the front headlight on the Chevrolet Onix. First, open the hood of your car and st…
How to Replace the Headlight Bulb in a Chevrolet Onix?
How to Replace the Headlight Bulb in a Chevrolet Onix?
Chevrolet Onix (2020-2026 / MK 2) To replace the headlight bulb in a Chevrolet Onix, open the hood to access the components inside the engine compartment. At the back of the headlight…
How to Replace the Radio in the Chevrolet Onix
How to Replace the Radio in the Chevrolet Onix
Chevrolet Onix (2020-2026 / MK 2) In today's video tutorial, you will see how to remove and replace the factory radio in the Chevrolet Onix in simple and quick steps. First, get in th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos