Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Interior Light Bulb on the Chevrolet Onix

Model: Chevrolet Onix MK 2 - Years 2020-2026

If you want to replace the interior dome light bulb, follow the instructions in this description, and you can also refer to the video. First, access the cabin and use a plastic pry tool to gently detach the lens of the dome light. Identify the type of bulb you want to install, which may also be an LED type, and disconnect the power connector of the existing bulb to connect the new one. Then, reposition the dome light and snap it back into place on the vehicle's ceiling.

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb in a Chevrolet Onix?
How to Replace the Headlight Bulb in a Chevrolet Onix?
Chevrolet Onix (2020-2026 / MK 2) To replace the headlight bulb in a Chevrolet Onix, open the hood to access the components inside the engine compartment. At the back of the headlight…
How to Replace the Headlight Bulb on a Chevrolet Onix
Chevrolet Onix (2020-2026 / MK 2) Today, follow the steps to remove and replace the low beam bulb of the front headlight on the Chevrolet Onix. First, open the hood of your car and st…
What does the message "Code 82" indicate in the Chevrolet Onix and how can it be removed?
What does the message "Code 82" indicate in the Chevrolet Onix and how can it be removed?
Chevrolet Onix (2013-2022 / MK 1) If the message "Code 82" appears in the instrument panel of our Chevrolet Onix, it means that it is time to perform the maintenance as the interval h…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos