Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Lights of a Chevrolet Spark

Model: Chevrolet Spark - Years 2009-2018
Part: Interior dome light bulb

To carry out this simple operation, you will need a flathead screwdriver to insert into the indicated slot in the video. In this case, simply rotate the screwdriver clockwise or counterclockwise to remove the opaque cover of the ceiling light, allowing access to the area where the bulb is located. You can extract it easily by hand to check if it is blown and then install the new bulb. Finally, replace the opaque cover back in position to secure it as before.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in a Chevrolet Spark 2
How to Replace the Cabin Air Filter in a Chevrolet Spark 2
Chevrolet Spark (2016-2022 / M400) If it is time to replace the cabin air filter in your Chevrolet Spark Mk2, follow the instructions in this guide to complete the operation without an…
Replacing the Front Bulb on a Chevrolet Spark
Replacing the Front Bulb on a Chevrolet Spark
Chevrolet Spark (2009-2018 / ) Is the bulb on your Chevrolet Spark damaged? Let's look at how to replace the bulb in the front headlamp. Open the engine bonnet by pulling the lever…
Replacing Headlight Bulbs on a Chevrolet Spark
Replacing Headlight Bulbs on a Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) Let’s see how to remove the damaged bulbs from the front headlight of a Chevrolet Spark. Lift the front bonnet and locate the caps at the back of the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos