Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Bumper on a Captiva

Model: Chevrolet Captiva MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Front bumper

See other generations:
Video tutorial

Let's see how to remove the damaged front bumper on a Chevrolet Captiva. Remove the bumper to replace it with a new one. Lift the car on a jack, unscrew the securing screws located at the top of the bumper (plastic protection).

Once the screws at the top are removed, take off the side impact absorbers and unscrew the screws in the wheel arch liners (remove the pins at the bottom of the bumper). Remove the bumper by hand from the front of the Chevrolet (disconnect the electrical terminals of the fog lights if present).

Fit the new bumper and screw in all the screws.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

Chevrolet Captiva (2006-2018 / MK 1) Before you can start, open the rear tailgate of the boot of your Chevrolet Captiva. Begin by removing the rear lights, simply by unscrewing the fixin…
Chevrolet Captiva (2006-2018 / MK 1) This guide provides instructions for removing and replacing the engine cooling radiator on a Chevrolet Captiva. First, open the bonnet and gently unc…
Chevrolet Captiva (2006-2018 / MK 1) Modify bi-xenon headlights on Captiva. …

Other guides you may be interested in

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos