Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Captiva
    4. : Front bumper

Chevrolet Captiva - Front bumper

Chevrolet Captiva (2006-2018 / MK 1)
How to replace the front bumper Captiva
Let's see how to remove the damaged front bumper on a Chevrolet Captiva. We remove the bumper and then replace it with a new one. We lift the car on a jack, …read all…
Posted on 22 March 2024 by ScegliAuto
Chevrolet Captiva (2006-2018 / MK 1)
How to remove the rear bumper of a Chevrolet Captiva
Before we can start, we will have to go to open the tailgate of the luggage compartment of our Chevrolet Captiva. So let's start by disassembling and removing …read all…
Posted on 14 January 2024 by ScegliAuto
Alternator (3) Car stereo (6) Battery (4) Spark plugs (1) Glow plugs (1) Key (4) -board computer (1) Checks and maintenance (8) Headlight (1) Particulate filter (1) Cabin air filter (5) Diesel filter (4) Oil filter (6) Hand brake (1) Xenon headlight kit (1) Light bulb (1) Headlight bulb (4) Rear light bulb (1) License plate light (1) Handle (1) Starter motor (1) Engine oil (3) Door panel (4) Windshield (1) Front bumper (2) Brake pads (1) Pump (1) Fuel pump (3) Instrument cluster (7) Radiator (3) Fuse box (3) Outside rearview mirror (3) Manufacturer's coat of arms (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos