Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chevrolet
  4. :
  5. Captiva
  6. : Headlight bulb

Chevrolet Captiva - Headlight bulb

Headlight Bulb Chevrolet Captiva (2006-2018 / mk 1)

Chevrolet Captiva (2006-2018 / MK 1)
How to change the front headlight bulb on the Chevrolet Captiva

If you intend to replace the front headlight bulb on this model of car, the following description includes all the necessary steps and instructions for the …Read all…
Posted on 30 October 2026 by ScegliAuto
Chevrolet Captiva (2006-2018 / MK 1)
How to Change the Front Bulbs on Captiva

Do you want to change the bulbs on the Chevrolet Captiva? Let's see how to disassemble the bulbs from inside the front headlamp. Lift the bonnet and locate the …Read all…
Posted on 9 May 2026 by ScegliAuto
Chevrolet Captiva (2006-2018 / MK 1)
Replacing Dipped Beam on Chevrolet Captiva

Open the bonnet and insert the support rod. Unscrew the two 10 mm screws located behind the affected headlamp and the bolt (also 10 mm) that secures it to the …Read all…
Posted on 7 May 2026 by ScegliAuto
Chevrolet Captiva (2006-2018 / MK 1)
Replacing Bulbs on Chevrolet Captiva

In this video, we will see how to replace the bulbs on our Chevrolet Captiva SUV. First, remove the plastic caps and take out the support. Then, using a …Read all…
Posted on 10 April 2026 by ScegliAuto

Alternator (3) Car stereo (6) Battery (1) Spark plugs (1) Glow plugs (2) Key (9) Headlight (2) Diesel particulate filter (1) Cabin air filter (6) Diesel fuel filter (4) Oil filter (9) Parking brake (2) Xenon headlight kit (1) Light bulb (1) Headlight bulb (4) Tail light bulb (1) License plate light (1) Handle (1) Starter motor (1) Door trim panel (4) Windshield (1) Front bumper (2) Brake pads (2) Pump (1) Fuel pump (3) Instrument cluster (1) Radiator (3) Fuse box (5) Side mirror (5) Warning light – error code (4) Service warning light (30) Manufacturer emblem (1)

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos