Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Captiva
    4. : Cabin air filter

Chevrolet Captiva - Cabin air filter

Chevrolet Captiva (2006-2018 / MK 1)
Where is the cabin filter located in the Chevrolet Captiva?
The pollen filter, also called the cabin air filter, is located, as the name itself indicates, inside the passenger compartment (be careful because this is not …read all…
Posted on 4 April 2023 by ScegliAuto
Chevrolet Captiva (2006-2018 / MK 1)
How to replace a cabin filter on Chevrolet Captiva
In this video tutorial we can see how it is possible to replace the cabin filter on Chevrolet Captiva, following some simple steps: the filter must be replaced …read all…
Posted on 7 September 2022 by ScegliAuto
Chevrolet Captiva (2006-2018 / MK 1)
How do you replace the cabin filter on the Chevrolet Captiva?
In order to replace the cabin filter of the Chevrolet Captiva, you need to open the glove box on the passenger side and loosen its screws located in the upper …read all…
Posted on 7 March 2024 by ScegliAuto
Chevrolet Captiva (2006-2018 / MK 1)
Replacing the pollen filter on the Captiva
Shall we remove the air filter of the Captiva? Very easy operation, let's see the disassembly of the filter. We open the door of the glove compartment (right …read all…
Posted on 20 December 2023 by ScegliAuto
Chevrolet Captiva (2006-2018 / MK 1)
Cabin air filter replacement
The passenger compartment air filter is located on the passenger side, immediately behind the glove compartment: to be able to replace it, the compartment …read all…
Posted on 30 August 2023 by ScegliAuto
Alternator (3) Car stereo (6) Battery (4) Spark plugs (1) Glow plugs (1) Key (4) -board computer (1) Checks and maintenance (8) Headlight (1) Particulate filter (1) Cabin air filter (5) Diesel filter (4) Oil filter (6) Hand brake (1) Xenon headlight kit (1) Light bulb (1) Headlight bulb (4) Rear light bulb (1) License plate light (1) Handle (1) Starter motor (1) Engine oil (3) Door panel (4) Windshield (1) Front bumper (2) Brake pads (1) Pump (1) Fuel pump (3) Instrument cluster (7) Radiator (3) Fuse box (3) Outside rearview mirror (3) Manufacturer's coat of arms (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos