Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a Chevrolet Captiva

Model: Chevrolet Captiva MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Cabin air filter

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the cabin filter on a Chevrolet Captiva by following a few simple steps: the filter should be replaced every 15,000 miles or at least once a year. First, purchase a new cabin filter.

Next, get inside the vehicle, turn off the engine, and pull the handbrake. The cabin filter is located behind the glove compartment, so open the glove compartment and remove all items inside.

Remove the fasteners located both under and inside the compartment; once the screws are removed, take out the compartment from its housing. Remove the filter cover and then take out the old filter from its location.

Position the new filter according to the arrows on the filter itself.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on the Chevrolet Captiva?
How to Replace the Cabin Filter on the Chevrolet Captiva?
Chevrolet Captiva (2006-2018 / MK 1) To replace the cabin filter on the Chevrolet Captiva, open the glove compartment on the passenger side and loosen the screws located at the top. This…
Where is the cabin filter located in the Chevrolet Captiva?
Where is the cabin filter located in the Chevrolet Captiva?
Chevrolet Captiva (2006-2018 / MK 1) In this video we can see where the cabin filter is located in the Chevrolet Captiva and how to proceed in case we need to replace it, an extremely si…
How to Replace the Oil Filter on a Chevrolet Captiva?
How to Replace the Oil Filter on a Chevrolet Captiva?
Chevrolet Captiva (2006-2018 / MK 1) To replace the oil filter on a Chevrolet Captiva, open the bonnet to locate the components in the engine bay: the oil filter is located in its housin…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos