Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chevrolet
  4. :
  5. Captiva
  6. : Alternator

Chevrolet Captiva - Alternator

Alternator Chevrolet Captiva (2006-2018 / mk 1)

Chevrolet Captiva (2006-2018 / MK 1)
Guide to Removing the Alternator from the Chevrolet Captiva

Today's guide will show the main instructions on how to remove and replace the alternator of the Chevrolet Captiva. First, open the bonnet of the vehicle and …Read all…
Posted on 16 November 2026 by ScegliAuto
Chevrolet Captiva (2006-2018 / MK 1)
How to Remove the Alternator from a Chevrolet Captiva 3.2 V6

Follow these main instructions to remove the alternator from a Chevrolet Captiva with a 3.2L V6 engine. First, open the bonnet of your car and lift the engine …Read all…
Posted on 10 May 2026 by ScegliAuto
Chevrolet Captiva (2006-2018 / MK 1)
Replacing Alternator on Chevrolet Captiva

Let's see how to replace the alternator on the Chevrolet Captiva. Lift the bonnet and secure it with the prop rod. Locate the power battery and disconnect the …Read all…
Posted on 11 May 2026 by ScegliAuto

Alternator (3) Car stereo (6) Battery (1) Spark plugs (1) Glow plugs (2) Key (9) Headlight (2) Diesel particulate filter (1) Cabin air filter (6) Diesel fuel filter (4) Oil filter (9) Parking brake (2) Xenon headlight kit (1) Light bulb (1) Headlight bulb (4) Tail light bulb (1) License plate light (1) Handle (1) Starter motor (1) Door trim panel (4) Windshield (1) Front bumper (2) Brake pads (2) Pump (1) Fuel pump (3) Instrument cluster (1) Radiator (3) Fuse box (5) Side mirror (5) Warning light – error code (4) Service warning light (30) Manufacturer emblem (1)

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos