Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Captiva
    4. : Fuel pump

Chevrolet Captiva - Fuel pump

Fuel Pump Chevrolet Captiva (2006-2018 / mk 1)

Chevrolet Captiva (2006-2018 / MK 1)
Where is the Fuel Pump Located on a Chevrolet Captiva?
In this tutorial, you can see where the fuel pump is located on a Chevrolet Captiva and how to remove it, for example, to replace the float or the entire unit. …Read all…
Posted on 19 July 2026 by ScegliAuto
Chevrolet Captiva (2006-2018 / MK 1)
How to Replace the Fuel Pump on a Chevrolet Captiva?
To replace the fuel pump on a Chevrolet Captiva, remove the rear seats as the pump is located beneath them. To access the pump, lift the carpet and locate the …Read all…
Posted on 5 June 2026 by ScegliAuto
Chevrolet Captiva (2006-2018 / MK 1)
Fuel Pump (Float) Replacement on a Chevrolet - Holden Captiva MK2
In this video, you will see how to remove and replace the fuel pump or float pump on the Chevrolet (or Holden) Captiva MK2. First, open the boot and recline …Read all…
Posted on 29 May 2026 by ScegliAuto
Alternator (3) Car stereo (6) Battery (1) Spark plugs (1) Glow plugs (1) Key (9) Headlight (2) Diesel particulate filter (1) Cabin air filter (6) Diesel fuel filter (4) Oil filter (9) Parking brake (2) Xenon headlight kit (1) Light bulb (1) Headlight bulb (4) Tail light bulb (1) License plate light (1) Handle (1) Starter motor (1) Door trim panel (4) Windshield (1) Front bumper (2) Brake pads (2) Pump (1) Fuel pump (3) Instrument cluster (1) Radiator (3) Fuse box (5) Side mirror (5) Warning light – error code (4) Service warning light (29) Manufacturer emblem (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos