Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuel Pump (Float) Replacement on a Chevrolet - Holden Captiva MK2

Model: Chevrolet Captiva MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuel pump

See other generations:
Video tutorial

In this video, you will see how to remove and replace the fuel pump or float pump on the Chevrolet (or Holden) Captiva MK2. First, open the boot and recline the rear seats; then remove the upper layer to access the fuel pump, as shown in the video. At this point, disconnect the electrical connector and remove the fuel hoses; unscrew the retaining ring and pull out the float pump, replacing it with the new one (of the correct type).

Finally, reassemble everything, following the video to the end!


Updated on 19 April 2026 by ScegliAuto


Related tutorials

How to enter your Holden/Chevrolet Captiva with a flat remote.
How to enter your Holden/Chevrolet Captiva with a flat remote.
Chevrolet Captiva (2006-2018 / MK 1) If you cannot open your Chevrolet/Holden Captiva with the remote, you can use the physical key stored inside the remote. Simply pull it out from the …
Modifying Headlights on Chevrolet Captiva
Modifying Headlights on Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) Modify bi-xenon headlights on Captiva. …
Where to Find and How to Access the Fuel Pump Fuse on a Chevrolet Captiva
Where to Find and How to Access the Fuel Pump Fuse on a Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) Good morning, today you will discover where the fuel pump fuse is located on your Chevrolet Captiva. Start by opening the rear boot lid. Then, look a…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos