|
Do it yourself
| |||
| ||||
How to Remove the Float from a Chevrolet Captiva?
Model: Chevrolet Captiva
MK 1
- Years 2006-2018
To remove the float from the Chevrolet Captiva, you need to disassemble the fuel pump installed in the car, which is located inside the fuel tank. To remove this pump, take out the rear seat bench and loosen the screws securing the pump in the housing below: after the device has been extracted, you can remove the float from the rest of the component to replace it with a new one. After the replacement, reassemble all the removed parts.
Updated on 7 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Chevrolet Captiva
(2006-2018 /
MK 1)
In this video, you will see how to remove and replace the fuel pump or float pump on the Chevrolet (or Holden) Captiva MK2. First, open the boot and …
Chevrolet Captiva
(2006-2018 /
MK 1)
In this tutorial, you can see where the fuel pump is located on a Chevrolet Captiva and how to remove it, for example, to replace the float or the en…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.145
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |