Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on a Chevrolet Captiva?

Model: Chevrolet Captiva MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuel pump

See other generations:
Video tutorial

To replace the fuel pump on a Chevrolet Captiva, remove the rear seats as the pump is located beneath them. To access the pump, lift the carpet and locate the metal cover protecting it. Once the screws securing the cover are removed, you can take off the cover and access the pump.

Disconnect it from the hoses and connectors, and it can then be pulled from its housing. Now, replace it by connecting it to the respective hoses and connectors and sealing it with the protective cap.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

Fuel Pump (Float) Replacement on a Chevrolet - Holden Captiva MK2
Fuel Pump (Float) Replacement on a Chevrolet - Holden Captiva MK2
Chevrolet Captiva (2006-2018 / MK 1) In this video, you will see how to remove and replace the fuel pump or float pump on the Chevrolet (or Holden) Captiva MK2. First, open the boot and …
How to Remove the Float from a Chevrolet Captiva?
How to Remove the Float from a Chevrolet Captiva?
Chevrolet Captiva (2006-2018 / MK 1) To remove the float from the Chevrolet Captiva, you need to disassemble the fuel pump installed in the car, which is located inside the fuel tank. To…
Where to Find and How to Access the Fuel Pump Fuse on a Chevrolet Captiva
Where to Find and How to Access the Fuel Pump Fuse on a Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) Good morning, today you will discover where the fuel pump fuse is located on your Chevrolet Captiva. Start by opening the rear boot lid. Then, look a…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos