Do it yourself
Frequently asked questions about cars and motorcycles

Where to Find and How to Access the Fuel Pump Fuse on a Chevrolet Captiva

Model: Chevrolet Captiva MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuse box

See other generations:
Video tutorial

Good morning, today you will discover where the fuel pump fuse is located on your Chevrolet Captiva. Start by opening the rear boot lid. Then, look around to locate the fuse box, which is on the left side of the boot area.

Once found, unclip and remove the cover of the fuse box. Next, search for the fuel pump fuse among those present in the box. Once you have located the fuse, you can proceed with any necessary replacement, completing the procedure.


Updated on 4 November 2026 by ScegliAuto


Related tutorials

Chevrolet Captiva (2006-2018 / MK 1) In this tutorial, you can see where the fuel pump is located on a Chevrolet Captiva and how to remove it, for example, to replace the float or the en…
Chevrolet Captiva (2006-2018 / MK 1) Modify bi-xenon headlights on Captiva. …
Chevrolet Captiva (2006-2018 / MK 1) In this video, you will see how to remove and replace the fuel pump or float pump on the Chevrolet (or Holden) Captiva MK2. First, open the boot and …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos