Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Fuel Pump Located on a Chevrolet Captiva?

Model: Chevrolet Captiva MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuel pump

See other generations:
Video tutorial

In this tutorial, you can see where the fuel pump is located on a Chevrolet Captiva and how to remove it, for example, to replace the float or the entire unit. It is located directly under the rear seat, which can be lifted by accessing from the boot.

Once done, if you need to remove it, lift the carpet, remove the large circular right cap, and disconnect both the connector and the two pipes. Then unscrew the large outer ring, using a large screwdriver and a hammer if necessary.

At this point, the pump is free to be extracted.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

How to Remove the Float from a Chevrolet Captiva?
How to Remove the Float from a Chevrolet Captiva?
Chevrolet Captiva (2006-2018 / MK 1) To remove the float from the Chevrolet Captiva, you need to disassemble the fuel pump installed in the car, which is located inside the fuel tank. To…
Fuel Pump (Float) Replacement on a Chevrolet - Holden Captiva MK2
Fuel Pump (Float) Replacement on a Chevrolet - Holden Captiva MK2
Chevrolet Captiva (2006-2018 / MK 1) In this video, you will see how to remove and replace the fuel pump or float pump on the Chevrolet (or Holden) Captiva MK2. First, open the boot and …
How to Replace the Fuel Pump on a Chevrolet Captiva?
How to Replace the Fuel Pump on a Chevrolet Captiva?
Chevrolet Captiva (2006-2018 / MK 1) To replace the fuel pump on a Chevrolet Captiva, remove the rear seats as the pump is located beneath them. To access the pump, lift the carpet and l…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos