Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Captiva
    4. : Car stereo

Chevrolet Captiva - Car stereo

Chevrolet Captiva (2006-2018 / MK 1)
How to remove the radio from the Chevrolet Captiva
The removal of the car radio from a Chevrolet Captiva is very simple, you just need to follow our video guide. To remove the car radio from its housing, we …read all…
Posted on 22 April 2024 by ScegliAuto
Chevrolet Captiva (2006-2018 / MK 1)
How do you replace the Chevrolet Captiva car radio?
In order to replace the radio of the Chevrolet Captiva, you need to pry with an object so that you can detach the trim that runs along the entire dashboard. …read all…
Posted on 10 April 2024 by ScegliAuto
Chevrolet Captiva (2006-2018 / MK 1)
Chevrolet Captiva radio disassembly
In this video tutorial we will see how to disassemble the original car radio of a Chevrolet Captiva, in simple steps and without the use of a special tool. …read all…
Posted on 22 February 2024 by ScegliAuto
Chevrolet Captiva (2006-2018 / MK 1)
Disassembly of the car radio of a Chevrolet Captiva
Remove the Chevrolet Captiva car radio? Let's see the disassembly of the car radio with assembly. We use plastic levers to disassemble the car radio cover. …read all…
Posted on 25 December 2023 by ScegliAuto
Chevrolet Captiva (2006-2018 / MK 1)
How to disassemble an original car stereo on Chevrolet captiva
How to disassemble an original car stereo on Chevrolet captiva? Let's see carefully in this video how to do the disassembly by following the steps: we use the …read all…
Posted on 22 October 2023 by ScegliAuto
Chevrolet Captiva (2006-2018 / MK 1)
How to disassemble the Chevrolet Captiva navigator
To disassemble the satellite navigator integrated in the dashboard center console, start by unhooking the side frames which also integrate the ventilation …read all…
Posted on 19 September 2023 by ScegliAuto
Alternator (3) Car stereo (6) Battery (4) Spark plugs (1) Glow plugs (1) Key (4) -board computer (1) Checks and maintenance (8) Headlight (1) Particulate filter (1) Cabin air filter (5) Diesel filter (4) Oil filter (6) Hand brake (1) Xenon headlight kit (1) Light bulb (1) Headlight bulb (4) Rear light bulb (1) License plate light (1) Handle (1) Starter motor (1) Engine oil (3) Door panel (4) Windshield (1) Front bumper (2) Brake pads (1) Pump (1) Fuel pump (3) Instrument cluster (7) Radiator (3) Fuse box (3) Outside rearview mirror (3) Manufacturer's coat of arms (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos