Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from a Chevrolet Captiva

Model: Chevrolet Captiva MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Car stereo

See other generations:
Video tutorial

Removing the radio from a Chevrolet Captiva? Let's look at how to take out the radio and install it. Use plastic levers to remove the radio cover panel. Insert the levers between the radio trim until it releases, then unscrew the securing screws on the sides of the radio.

Pull the stereo towards you as shown in the video: carefully extract the radio, being mindful of the various wiring (disconnect the power connectors and the antenna cable). Secure the original radio or a generic brand using the appropriate adapter for the input and connector.

Refit the radio cover panels.


Updated on 29 March 2026 by ScegliAuto


Related tutorials

How to Replace the Radio in the Chevrolet Captiva
How to Replace the Radio in the Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) To replace the radio in the Chevrolet Captiva, use a tool to pry off the trim that runs along the dashboard. Once removed, you can also take out the …
How to Remove the Car Radio from the Chevrolet Captiva
How to Remove the Car Radio from the Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) Removing the car radio from a Chevrolet Captiva is quite simple; just follow our video guide. To take out the radio, insert a plastic lever into the …
How to Remove the Original Radio from a Chevrolet Captiva
How to Remove the Original Radio from a Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) How to remove the original radio from a Chevrolet Captiva? Follow these steps carefully in the video: use the original or aftermarket metal keys to r…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos