Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the front headlight bulb on the Chevrolet Captiva

Model: Chevrolet Captiva MK 1 - Years 2006-2018
Part: Headlight bulb

If you intend to replace the front headlight bulb on this model of car, the following description includes all the necessary steps and instructions for the replacement. After opening the bonnet, locate the bulb that needs replacing. Then unscrew the screws securing the front cover to remove it. Next, unscrew the screws above the headlight unit to remove it, then open the rear cover of the headlight and disconnect the electrical connector before removing the bulb. Take the new bulb and position it, then reassemble all components in reverse order.

Updated on 30 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to remove the front headlight of the Chevrolet Captiva
How to remove the front headlight of the Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) Today we will explain how to remove the right front headlight of the Chevrolet Captiva in order to replace the bulb. To remove the headlight, first o…
How to Change the Front Bulbs on Captiva
How to Change the Front Bulbs on Captiva
Chevrolet Captiva (2006-2018 / MK 1) Do you want to change the bulbs on the Chevrolet Captiva? Let's see how to disassemble the bulbs from inside the front headlamp. Lift the bonnet and …
Replacing Bulbs on Chevrolet Captiva
Replacing Bulbs on Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) In this video, we will see how to replace the bulbs on our Chevrolet Captiva SUV. First, remove the plastic caps and take out the support. Then, usin…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos