Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Car Headlight Bulb

Model: Chevrolet Captiva MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Light bulb

See other generations:
Video tutorial

You can change the headlight bulb of your car independently, without needing the help of a specialist. The following guide shows you how to do it. Once you have purchased the new bulb, you can proceed to replace the faulty one. After removing the bulb to be replaced, open the bonnet and unscrew the screws and tab in front of you. Next, unscrew the cap connected to the bulb itself, disconnect it, and replace it with the working one. This procedure is extremely easy and quick to execute.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

Replacement of the Cabin Air Filter
Replacement of the Cabin Air Filter
Chevrolet Captiva (2006-2018 / MK 1) The cabin air filter is located on the passenger side, just behind the glove compartment. To replace it, you need to remove the glove compartment its…
How to Replace the Key Battery of the Chevrolet Captiva
How to Replace the Key Battery of the Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) Replacing the button battery inside the smart key of your Chevrolet Captiva is one of the simplest tasks you can perform independently. This guide pr…
How to Remove the Float from a Chevrolet Captiva?
How to Remove the Float from a Chevrolet Captiva?
Chevrolet Captiva (2006-2018 / MK 1) To remove the float from the Chevrolet Captiva, you need to disassemble the fuel pump installed in the car, which is located inside the fuel tank. To…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos