Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Chevrolet Equinox

Model: Chevrolet Equinox MK 3 - Years 2018-2025
Part: Service warning light

After performing the standard service on your Chevrolet Equinox and changing the oil, you need to execute a manual reset to permanently eliminate the warning light at every start. This is a very simple operation that anyone can perform. Read the following instructions carefully. First, insert the key and turn on the vehicle's ignition only. Then, navigate through the menu using the directional arrows on the right side of the steering wheel. Once you see the oil life remaining option, press the "OK" button and confirm the reset. A few moments later, the procedure is complete.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on the Chevrolet Equinox
How to Reset the Oil Light on the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) Before discovering how to correctly reset the engine oil light on your Chevrolet Equinox, ensure that the engine is off. Immediately insert the key a…
How to Reset the Oil Light on a Chevrolet Equinox?
How to Reset the Oil Light on a Chevrolet Equinox?
Chevrolet Equinox (2018-2025 / MK 3) On the Chevrolet Equinox, the oil light can be reset in a few steps directly from the onboard computer menu using the buttons on the right side of th…
Oil light reset on a Chevrolet Equinox
Oil light reset on a Chevrolet Equinox
Chevrolet Equinox (2018-2025 / MK 3) Today we will see how to reset the oil change light on a third generation Chevrolet Equinox. So let's start the procedure by starting the engine, the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos