Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Chevrolet Equinox

Model: Chevrolet Equinox MK 3 - Years 2018-2025
Part: Service warning light

If you are wondering how to manually reset the engine oil change light on your Chevrolet Equinox, just follow this quick guide. First, ensure that all the doors of the vehicle are properly closed. Next, turn on the ignition and navigate to the button panel located below the radio. Locate and press the "Menu" button until you see the oil life message on the dashboard display. At this point, press and hold the "Set/CLR" button for a few seconds, and release it once the remaining oil life returns to 100%.

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on the Chevrolet Equinox
How to Reset the Oil Light on the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) Before discovering how to correctly reset the engine oil light on your Chevrolet Equinox, ensure that the engine is off. Immediately insert the key a…
How to Reset the Oil Light on the Chevrolet Equinox
How to Reset the Oil Light on the Chevrolet Equinox
Chevrolet Equinox (2018-2025 / MK 3) After performing the standard service on your Chevrolet Equinox and changing the oil, you need to execute a manual reset to permanently eliminate the…
How to Reset the Oil Light on a Chevrolet Equinox
How to Reset the Oil Light on a Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) If you have just performed an oil change on your Chevrolet Equinox, the oil warning light may still be illuminated. This is normal, so don’t worry. F…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos