Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light on a Chevrolet Equinox?

Model: Chevrolet Equinox MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Warning light – error code

See other generations:
Video tutorial

In this tutorial, you will see how to reset the oil service light on a Chevrolet Equinox, a very simple and quick operation to perform only after completing the oil and filter change. Start by turning on the ignition and locating the buttons you will use, located at the bottom edge of the center console.

Next, enter the general menu, navigate to the engine oil screen, and press the "SET/CLR" button. At this point, just confirm the reset and restart the ignition to verify that the procedure was successful.


Updated on 12 May 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service on a Chevrolet Equinox?
How to Reset the Oil Service on a Chevrolet Equinox?
Chevrolet Equinox (2018-2025 / MK 3) Resetting the oil service on a Chevrolet Equinox, as shown in this tutorial, is an extremely simple and quick operation. Before doing this, you shoul…
Reset the Oil Light on a Chevrolet Equinox
Reset the Oil Light on a Chevrolet Equinox
Chevrolet Equinox (2018-2025 / MK 3) Today, let's see how to reset the oil change light on a third-generation Chevrolet Equinox. Start by turning on the engine. Next, using the right sid…
Resetting the tire pressure warning of the Chevrolet Equinox
Resetting the tire pressure warning of the Chevrolet Equinox
Chevrolet Equinox (2005-2009 / MK 1) The information provided in this guide will allow us to reset the tire pressure warning of the Chevrolet Equinox; before resetting the TPMS sensors, …

    Frequently Asked Questions

    • Equinox 2010-2017 - What does the Chevrolet Equinox TC light mean? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos