Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil light reset on a Chevrolet Equinox

Model: Chevrolet Equinox MK 3 - Years 2018-2025
Part: Service warning light

Today we will see how to reset the oil change light on a third generation Chevrolet Equinox. So let's start the procedure by starting the engine, then, using the controls on the right side of the steering wheel, scroll to the right on the information display screen of the speedometer until you reach the "i" info screen as shown in the video, then scroll down the menu to display the notification of the remaining life of the engine oil expressed in percentage and finally press and hold the central button on the control panel to perform the reset.

Posted on 4 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on the Chevrolet Equinox
How to Reset the Oil Light on the Chevrolet Equinox
Chevrolet Equinox (2018-2025 / MK 3) After performing the standard service on your Chevrolet Equinox and changing the oil, you need to execute a manual reset to permanently eliminate the…
How to Reset Engine Oil Life on Chevrolet Equinox Mk3
How to Reset Engine Oil Life on Chevrolet Equinox Mk3
Chevrolet Equinox (2018-2025 / MK 3) This guide shows how to reset the engine oil life on the Chevrolet Equinox Mk3. No special devices are needed; simply turn on the vehicle's ignition.…
How to Reset the Oil Light on the Chevrolet Equinox
How to Reset the Oil Light on the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) Before discovering how to correctly reset the engine oil light on your Chevrolet Equinox, ensure that the engine is off. Immediately insert the key a…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos