Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Matiz
    4. : What is the fuse scheme of the Chevrolet Matiz?

Chevrolet Matiz - Video tutorial

Model: Chevrolet Matiz MK 1 - Years 1998-2010
Part: Fuse box
Operation: What is the fuse scheme of the Chevrolet Matiz?

The same diagram is shown in the user instruction manual issued by the dealer when the new car is purchased. As can be seen from the video, the fuse boxes on the Chevrolet Matiz are two: the first located inside the passenger compartment and the second inside the engine compartment. In the box inside the passenger compartment there are 18 fuses (numbered from F1 to F18) and 6 relays. The box inside the engine compartment, located next to the battery, contains a greater number of fuses and relays, ie 25 fuses and 10 relays. They are all easily accessible for a replacement.


Posted on 2 June 2022 by ScegliAuto

    Frequently Asked Questions

    • Matiz 1998-2010 - Where are the fuses located on the Chevrolet Matiz? Read Answer
    • Matiz 1998-2010 - Where is the cigarette lighter fuse on the Chevrolet Matiz? Read Answer
    • Matiz 1998-2010 - Where are the fuse boxes located in the Chevrolet Matiz? Read Answer
    • Matiz 1998-2010 - How do you replace a Chevrolet Matiz fuse? Read Answer
    • Matiz 1998-2010 - Where are the Chevrolet Matiz fuses located? Read Answer
    • Matiz 1998-2010 - Where is the fuse box located in the Chevrolet Matiz? Read Answer
    • Matiz 1998-2010 - Where is the Chevrolet Matiz fuse box located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos