Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Battery on Chevrolet Matiz

Model: Chevrolet Matiz MK 1 - Years 1998-2010
Part: Battery

Replacing a faulty battery on a Chevrolet Matiz? Remove the battery from the engine bay. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the bonnet, disengaging the locking lever with your fingers, and secure it. You will find the battery inside the engine bay. Remove the securing bolts of the battery terminals, then take out the battery from the engine bay and replace it with a new one (same voltage). Close the bonnet after maintenance. Test the vehicle by starting the engine.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse diagram for the Chevrolet Matiz?
What is the fuse diagram for the Chevrolet Matiz?
Chevrolet Matiz (1998-2010 / MK 1) The Chevrolet Matiz shares, as evidenced in this short video posted here, the location of the fuse boxes and their diagrams with the Chevrolet Spark.…
Where are the fuses located in the Chevrolet Matiz?
Where are the fuses located in the Chevrolet Matiz?
Chevrolet Matiz (1998-2010 / MK 1) If one or more devices in your Chevrolet Matiz suddenly stop working, first check the status of the respective fuses, the location of which is indica…
Where is the fuse box of the Chevrolet Matiz located?
Where is the fuse box of the Chevrolet Matiz located?
Chevrolet Matiz (1998-2010 / MK 1) Inside the Chevrolet Matiz, only one fuse box is placed. The fuse box is located inside the front hood next to the battery, and it contains both low …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos