Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlights on Daewoo - Chevrolet Matiz

Model: Chevrolet Matiz MK 1 - Years 1998-2010
Part: Headlight

Today, we will go through the steps to remove the front headlights on a first-generation Daewoo or Chevrolet Matiz. First, open the front bonnet; then use a screwdriver to unscrew the securing screw of the plastic cover located under the headlight, in order to remove it. At this point, unscrew the screws securing the headlight, which are located both at the top and bottom; use a 10 mm socket spanner for this; then remove the headlight by disconnecting the bulb connector found at the back!

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on Your Daewoo Matiz
How to Replace the Timing Belt on Your Daewoo Matiz
Chevrolet Matiz (1998-2010 / MK 1) This video will teach you how to replace the old timing belt on your Daewoo Matiz with a new one. To facilitate the removal and replacement of the be…
How to Replace the Air Filter on the Chevrolet - Daewoo Matiz
How to Replace the Air Filter on the Chevrolet - Daewoo Matiz
Chevrolet Matiz (1998-2010 / MK 1) In this video tutorial, we will see the steps to dismantle and replace the engine air filter on the Chevrolet or Daewoo Matiz. First, open the bonnet…
Where are the Fuses Located in the Daewoo Matiz?
Where are the Fuses Located in the Daewoo Matiz?
Chevrolet Matiz (1998-2010 / MK 1) In this video, see the location of the fuse boxes and their respective diagrams in the Daewoo Matiz, useful if you need to check the fuse of a malfun…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos