Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Brake Pads on a Chevrolet Sail

Model: Chevrolet Sail MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Brake pads

See other generations:
This video is currently unavailable

If you plan to replace the brake pads on this car model, the following description provides all the necessary instructions and information on how to correctly perform the replacement. First, remove the wheel lug bolts and get two wrenches to remove the bolts securing the brake caliper lock pin. Then proceed to remove the caliper, and underneath it, you will find the pads that you can extract and replace with the new ones.

After that, reassemble all the components, and you're done.


Updated on 4 June 2026 by ScegliAuto


Related tutorials

How to Replace the Handbrake Boot on a Chevrolet Sail?
How to Replace the Handbrake Boot on a Chevrolet Sail?
Chevrolet Sail (2014-2023 / MK 3) To replace the handbrake boot on a Chevrolet Sail, use a tool to pry off the clips located at the base of the handbrake boot. Once the clips are remo…
How to Replace the Water Pump on a Chevrolet Sail?
Chevrolet Sail (2014-2023 / MK 3) To replace the water pump on a Chevrolet Sail, open the hood to access the components on the left side of the engine block. Once you locate the timin…
How to Replace the Coolant in a Chevrolet Sail?
How to Replace the Coolant in a Chevrolet Sail?
Chevrolet Sail (2010-2017 / MK 2) To replace the coolant in a Chevrolet Sail, open the hood to access the components inside the engine compartment. At the back of the radiator, you wi…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos