Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in a 2008 Chevrolet Equinox

Model: Chevrolet Equinox MK 1 - Years 2005-2009
Part: Air filter

If the air filter in the engine compartment of your 2008 Chevrolet Equinox Mk1 needs to be replaced and you don't know how, don't worry because below you will find all the necessary instructions. First, make sure the vehicle is completely off, then lift the hood. Locate the air filter box on the left side of the engine compartment and remove the safety clips. Disconnect the electrical connector and proceed to remove the protective cover. Finally, replace the old filter with the new one, and you're done.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Chevrolet Equinox?
How to Replace the Air Filter on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) To replace the air filter on a Chevrolet Equinox, open the hood and locate the box containing the filter, which is positioned near the right front he…
Replacing the Air Filter on the Chevrolet Equinox
Replacing the Air Filter on the Chevrolet Equinox
Chevrolet Equinox (2005-2009 / MK 1) In this video tutorial, you will learn how to remove and replace the engine air filter on the Chevrolet Equinox, following the instructions below. Fi…
How to Replace the Air Filter in a Chevrolet Equinox
How to Replace the Air Filter in a Chevrolet Equinox
Chevrolet Equinox (2018-2025 / MK 3) The air filter located in the engine compartment of your Chevrolet Equinox is one of the most important components of the vehicle, so it is essential…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos