Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a 2014 Chevrolet Equinox

Model: Chevrolet Equinox MK 2 - Years 2010-2017
Part: Air filter

In this new mini guide dedicated to your 2014 Chevrolet Equinox, you will discover the steps to take if you want to replace the engine air filter yourself. Before starting the actual procedure, park the vehicle safely and turn it off completely. Next, lift the hood and locate the air filter box on the lower left side. At this point, remove the screws using a suitable wrench, and finally, replace the filter.

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Air Filter on the Chevrolet Equinox
Replacing the Air Filter on the Chevrolet Equinox
Chevrolet Equinox (2005-2009 / MK 1) In this video tutorial, you will learn how to remove and replace the engine air filter on the Chevrolet Equinox, following the instructions below. Fi…
Replacing the Cabin Air Filter on the Chevrolet Equinox
Replacing the Cabin Air Filter on the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) This guide shows you how to remove and replace the cabin air filter on the Chevrolet Equinox. First, get inside the vehicle on the passenger side and…
How to Replace the Air Filter on a Chevrolet Equinox?
How to Replace the Air Filter on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) To replace the air filter on a Chevrolet Equinox, open the hood and locate the box containing the filter, which is positioned near the right front he…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos