Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Brake Shoes on a Chevrolet City Express

Model: Chevrolet City Express MK 1 - Years: 2015, 2016, 2017, 2018
Part: Brake drums and shoes

Video tutorial

Let's briefly go over the steps needed to remove and replace the rear brake shoes on a Chevrolet City Express. First, lift the vehicle at the rear and start by removing the wheel; then, remove the brake drum by unscrewing the screws to extract it, as shown in the video.

At this point, remove the spring and the retainers of the shoes, taking them off the backing plate; clean the brake system of dirt and check the wear condition of the drum, then install the new brake shoes (of excellent quality)!


Updated on 19 June 2026 by ScegliAuto


Related tutorials

Chevrolet City Express (2015-2018 / MK 1) To replace the front brake pads on a Chevrolet City Express, lift the vehicle so that the corresponding front wheel does not touch the ground. Then, …
Chevrolet City Express (2015-2018 / MK 1) In this tutorial, you will see how to unlock the automatic transmission in the Chevrolet City Express van. This is a very simple operation to perform…
Chevrolet City Express (2015-2018 / MK 1) In today's video, you will learn how to replace the cabin air filter in a Chevrolet City Express. First, open the passenger side door. Next, open the…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos