Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Chevrolet City Express?

Model: Chevrolet City Express MK 1 - Years: 2015, 2016, 2017, 2018
Part: Brake pads

Video tutorial

To replace the front brake pads on a Chevrolet City Express, lift the vehicle so that the corresponding front wheel does not touch the ground. Then, remove the bolts securing the wheel to fully take it off, providing access to the internal components.

Next, unscrew the bolts holding the brake caliper to remove it from the rotor, sliding out the pads inside. Once the new pads are installed, reattach the brake caliper and the corresponding wheel.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Shoes on a Chevrolet City Express
How to Replace the Rear Brake Shoes on a Chevrolet City Express
Chevrolet City Express (2015-2018 / MK 1) Let's briefly go over the steps needed to remove and replace the rear brake shoes on a Chevrolet City Express. First, lift the vehicle at the rear an…
How to Replace the Cabin Air Filter in a Chevrolet City Express
How to Replace the Cabin Air Filter in a Chevrolet City Express
Chevrolet City Express (2015-2018 / MK 1) In today's video, you will learn how to replace the cabin air filter in a Chevrolet City Express. First, open the passenger side door. Next, open the…
How to Replace the Key Fob Battery in a Chevrolet City Express?
How to Replace the Key Fob Battery in a Chevrolet City Express?
Chevrolet City Express (2015-2018 / MK 1) In this tutorial, you will see how to replace the battery in the remote key fob of the Chevrolet City Express van, a very simple and quick operation.…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos