Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in a Chevrolet City Express

Model: Chevrolet City Express MK 1 - Years: 2015, 2016, 2017, 2018
Part: Cabin air filter

Video tutorial

In today's video, you will learn how to replace the cabin air filter in a Chevrolet City Express. First, open the passenger side door.

Next, open the glove compartment. At this point, you will need to remove the glove compartment to access the filter; disconnect the retaining pins and remove the glove compartment.

You can now locate the cabin air filter under the dashboard and proceed to remove it. Clean the area where the filter sits, then install a new unit in its place. Finally, reassemble the parts.


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Chevrolet City Express
How to Replace the Air Filter on a Chevrolet City Express
Chevrolet City Express (2015-2018 / MK 1) To replace the air filter on this vehicle yourself, refer to the images in the video and the description below. Once you open the hood, locate the bo…
How to Clean the Mass Sensors on a Chevrolet City Express
How to Clean the Mass Sensors on a Chevrolet City Express
Chevrolet City Express (2015-2018 / MK 1) As seen in the video, before you start cleaning your mass air flow sensor on the 2015 Chevrolet City Express cargo van, get a suitable spray for the …
Where Are the Fuses in the Chevrolet City Express Van?
Where Are the Fuses in the Chevrolet City Express Van?
Chevrolet City Express (2015-2018 / MK 1) In this video, you can see where all the fuse boxes are located in the Chevrolet City Express van and how to access them, useful if a device is malfu…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos