Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where Are the Fuses in the Chevrolet City Express Van?

Model: Chevrolet City Express MK 1 - Years: 2015, 2016, 2017, 2018
Part: Fuse box

Video tutorial

In this video, you can see where all the fuse boxes are located in the Chevrolet City Express van and how to access them, useful if a device is malfunctioning and you want to check the status of its fuse. As shown, under the hood, you can find the first three boxes: one in front of the battery and two to its left.

To access them, simply open their respective covers. The fourth and final box is located inside the cabin, behind the panel in the lower left area of the dashboard.

In case of a blown fuse, always use a replacement with the same amperage.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a Chevrolet City Express
How to Replace the Cabin Air Filter in a Chevrolet City Express
Chevrolet City Express (2015-2018 / MK 1) In today's video, you will learn how to replace the cabin air filter in a Chevrolet City Express. First, open the passenger side door. Next, open the…
How to Unlock the Automatic Transmission in a Chevrolet City Express Van?
How to Unlock the Automatic Transmission in a Chevrolet City Express Van?
Chevrolet City Express (2015-2018 / MK 1) In this tutorial, you will see how to unlock the automatic transmission in the Chevrolet City Express van. This is a very simple operation to perform…
How to Replace the Front Brake Pads on a Chevrolet City Express?
How to Replace the Front Brake Pads on a Chevrolet City Express?
Chevrolet City Express (2015-2018 / MK 1) To replace the front brake pads on a Chevrolet City Express, lift the vehicle so that the corresponding front wheel does not touch the ground. Then, …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos