Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Clean the Mass Sensors on a Chevrolet City Express

Model: Chevrolet City Express MK 1 - Years 2015-2018
Part: Checks and maintenance

As seen in the video, before you start cleaning your mass air flow sensor on the 2015 Chevrolet City Express cargo van, get a suitable spray for the job. Using a 7 mm ratchet, remove two screws and pull the sensor out. Often, a good cleaning is all it takes to restore a functioning sensor. If you need to replace the part, it's best to order it from the manufacturer. Once the sensor is removed, clean it with the cleaner and let it dry for 30 minutes. Sometimes it may work again, sometimes it won't, but cleaning the various components of the air flow is always beneficial and is part of general maintenance.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Shoes on a Chevrolet City Express
How to Replace the Rear Brake Shoes on a Chevrolet City Express
Chevrolet City Express (2015-2018 / MK 1) Let's briefly go over the steps needed to remove and replace the rear brake shoes on a Chevrolet City Express. First, lift the vehicle at the rear an…
How to Remove the Outside Mirror on a Chevrolet City Express
How to Remove the Outside Mirror on a Chevrolet City Express
Chevrolet City Express (2015-2018 / MK 1) To remove an outside rearview mirror on a Chevrolet City Express for replacement, follow these steps. Open the driver's door, remove the plastic tria…
How to Replace the Key Fob Battery in a Chevrolet City Express?
How to Replace the Key Fob Battery in a Chevrolet City Express?
Chevrolet City Express (2015-2018 / MK 1) In this tutorial, you will see how to replace the battery in the remote key fob of the Chevrolet City Express van, a very simple and quick operation.…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos