Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Chevrolet Spark 2013/2015?

Model: Chevrolet Spark M300, MK 1 - Years 2009-2016
Part: Cabin air filter

In this video, we will see the easy operation of replacing the cabin air filter on a Chevrolet Spark 2013/2015: the drawer with the filter is located behind the glove compartment, which must be emptied; on each side, there is a plastic release tab that, when pushed inward, will allow the drawer to lower completely without any force. Behind the glove compartment, you will find a small door with two fastening tabs that we will unlock to remove the cover. Pull out the old filter, grip it firmly, and slide it downwards. Clean the drawer thoroughly from leaves, dust, and other debris, and insert the new filter in its place, ensuring that the arrows are oriented the same way as the old one. Replace the cover and raise the glove compartment. You are done.

Posted on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in a Chevrolet Spark 2
How to Replace the Cabin Air Filter in a Chevrolet Spark 2
Chevrolet Spark (2016-2022 / M400) If it is time to replace the cabin air filter in your Chevrolet Spark Mk2, follow the instructions in this guide to complete the operation without an…
Replacement of the LPG filter for the Chevrolet Spark 1.0
Replacement of the LPG filter for the Chevrolet Spark 1.0
Chevrolet Spark (2009-2016 / M300, MK 1) Below we will discover the instructions that will allow us to disassemble and replace the LPG filter of the Chevrolet Spark 1.0. First, let's open th…
How to Replace the Fuel Filter in a Chevrolet Spark?
Chevrolet Spark (2009-2016 / M300, MK 1) Replacing the fuel filter in a Chevrolet Spark is very simple, but you must take the necessary precautions by raising the car on a jack, as access sp…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos