Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Brake Pads on a Chevrolet Nubira

Model: Chevrolet Nubira J100 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Brake pads

Video tutorial

The instructions in this guide will illustrate the procedure for removing and replacing the front brake pads on a Chevrolet Nubira. First, lift the vehicle and begin removing the front wheel; then apply pressure to the caliper piston to retract it, unscrewing the rear mounting bolts to remove the caliper, as shown in the video.

At this point, replace the brake pads with new ones, preferably original ones; clean the caliper of any residual dirt, and finally reinstall the caliper onto the brake disc.


Posted on 4 May 2026 by ScegliAuto


Related tutorials

Chevrolet Nubira (1997-2003 / J100) Let’s see how to temporarily repair a broken air hose on a Chevrolet Nubira. The air intake hose, which carries air from the filter to the engine, ha…
Chevrolet Nubira (1997-2003 / J100) In this guide, learn how to remove the rear brake disc on a Daewoo Nubira. Position your car on a column lift or jack, loosen the bolts with a socket…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos