Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Brake Disc on a Daewoo Nubira

Model: Chevrolet Nubira J100 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Brake rotors

Video tutorial

In this guide, learn how to remove the rear brake disc on a Daewoo Nubira. Position your car on a column lift or jack, loosen the bolts with a socket spanner, and raise it to a comfortable height.

Unscrew the bolts and remove the wheel, then start unscrewing the bolts of the brake caliper to detach it from the bracket. Use a socket spanner to loosen the brake fluid bolt and wind back the piston until all fluid has drained out. Now remove the caliper bracket and unscrew the bolts on the brake disc to pull it off. Clean all dirt and debris from the disassembled parts.

Refit the brake disc with all the associated Torx bolts, tighten the caliper bracket to the disc and the pads, then mount the brake caliper. Before fitting the wheel, bleed the brake caliper and tighten the bolt.

Now place the wheel onto the hub and screw in all the bolts, lower the car, top up any lost brake fluid, and always check the brake pedal pressure.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Chevrolet Nubira
How to Replace the Front Brake Pads on a Chevrolet Nubira
Chevrolet Nubira (1997-2003 / J100) The instructions in this guide will illustrate the procedure for removing and replacing the front brake pads on a Chevrolet Nubira. First, lift the v…
How to temporarily repair a broken air hose on a Chevrolet Nubira?
How to temporarily repair a broken air hose on a Chevrolet Nubira?
Chevrolet Nubira (1997-2003 / J100) Let’s see how to temporarily repair a broken air hose on a Chevrolet Nubira. The air intake hose, which carries air from the filter to the engine, ha…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos