Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of ABS Sensor on Chevrolet Kalos

Model: Chevrolet Kalos MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Brake system

Video tutorial

To remove and replace the ABS sensor on the Chevrolet Koleos, proceed as follows: 1) Remove the affected wheel. 2) Locate the position of the ABS sensor. 3) Unscrew the fixing bolts that secure it to the wheel hub. 4) Pull out the ABS sensor head. 5) Disconnect the cable from the mounting points. 6) Unclip the cable from the electrical system. 7) Clean the sensor head seat. 8) Attach the cable of the new ABS sensor to the clip. 9) Secure the cable of the new ABS sensor to the mounting points. 10) Insert the head of the new ABS sensor into its seat and secure it with the bolts. 11) Refit the wheel.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box of the Chevrolet Kalos
Where to Find the Fuse Box of the Chevrolet Kalos
Chevrolet Kalos (2002-2008 / MK 1) The fuse box on your Chevrolet Kalos is easy to locate, and with this guide, you won't have any difficulty completing the task. First, park the car o…
Removing the Door Panel on a Chevrolet Kalos
Removing the Door Panel on a Chevrolet Kalos
Chevrolet Kalos (2002-2008 / MK 1) To remove the panel of a Chevrolet Kalos, take off the panel for replacement or to access the inside of the door. Remove the plastic cover around the…
How to Remove the Left Rear Door Panel on a Chevrolet Kalos
How to Remove the Left Rear Door Panel on a Chevrolet Kalos
Chevrolet Kalos (2002-2008 / MK 1) How do you remove the left rear door panel on a Chevrolet Kalos? This video explains the procedure. Use a lever or screwdriver to pry off the handle …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos