Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the dashboard of the Chevrolet Matiz

Model: Chevrolet Matiz MK 1 - Years 1998-2010
Part: Dashboard

To be able to disassemble the dashboard and the control panel of the car it is necessary to proceed as follows: identify the fixing screws of the dashboard mask (which also includes the radio mask, i.e. it is a single piece), a screw is located on the right side of the steering column and the other on the top of the control box. After that, start pulling the mask towards you slowly in order to unhook all the interlocking clips one by one without breaking them. At that point it will be possible to remove the dashboard and control panel, paying attention to the rear electrical wiring.

Posted on 13 November 2022 by ScegliAuto

Video tutorial

Related tutorials

How to remove the door panel of a Chevrolet Matiz
How to remove the door panel of a Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) Let's see how to remove the door panel of a Chevrolet Matiz. We remove with a lever the plastic placed at the corner of the window. With a screwdrive…
How to Remove and Refit the Stereo on a Chevrolet Matiz
How to Remove and Refit the Stereo on a Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) Let’s see how to remove and refit the stereo on a Chevrolet Matiz. First, use a plastic lever to detach the radio plastics and remove the trim from t…
How to change the fuel injectors of the Chevrolet Matiz
How to change the fuel injectors of the Chevrolet Matiz
Chevrolet Matiz (1998-2010 / MK 1) In today's video tutorial we will see how to disassemble and replace the fuel injectors of the gasoline Chevrolet Matiz. First of all we open the bon…

Other guides you may be interested in

How to Install Seat Covers on an Audi Q7

Are you planning to install seat covers on your Audi? Let's see this video that explains how to do it. First, move the seat forward and raise the seat cushion. Next, remove the headrest from the backrest. Slide the seat cover from the top down over the backrest. If necessary, remove the controls on the side of the seat by pulling them towards you. After sliding on the upper seat cover, adjust it around the headrest seals with your hands. Install the lower seat cover on the seat cushion. Use plastic trim tools to assist with the installation.

Watch the video!


by ScegliAuto

More videos