Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on the Chevrolet Trax.

Model: Chevrolet Trax MK 1 - Years 2013-2022
Part:

The TPMS light on your Chevrolet Trax Mk1 turns on when there is a flat tire or when you have inflated the tires to an incorrect pressure. It may also turn on due to a minor error in the control unit. Below we will explain how you can manually reset it. After turning on the instrument panel, locate the small button inside the speedometer and press it several times until the display shows "Tire learn." At this point, hold down the same button and wait a few seconds, then release it as soon as you hear a beep confirming the completion of the TPMS light reset.

Posted on 25 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Light on a Chevrolet Trax
How to Reset the TPMS Light on a Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) To manually reset the TPMS light on your Chevrolet Trax, follow these steps. First, get inside the car and turn on the instrument cluster. Immediatel…
How do you reset the Service light on the Chevrolet Trax?
How do you reset the Service light on the Chevrolet Trax?
Chevrolet Trax (2013-2022 / MK 1) In order to reset the Service light of the Chevrolet Trax, you need to turn on the instrument panel by inserting the ignition key into the correspond…
How to Reset the Oil Light of the Chevrolet Trax
How to Reset the Oil Light of the Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) To correctly reset the engine oil light of your Chevrolet Trax, simply follow these easy steps. First, enter the cabin and reach the driver's seat. N…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos