Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Trax
    4. : To reset the TPMS (Tire Pressure Monitoring System) light on the Chevrolet Trax.

Chevrolet Trax - Video tutorial

Model: Chevrolet Trax MK 1 - Years 2013-2022
Part: Instrument cluster
Operation: To reset the TPMS (Tire Pressure Monitoring System) light on the Chevrolet Trax.

To manually reset the TPMS light on your Chevrolet Trax, simply follow these steps. First, enter the car and turn on the instrument panel. Then, locate the "Menu" button on the left side of the steering wheel lever and press it several times until the tire pressure option is displayed on the instrument panel. Next, hold down the "Set/CLR" button for a couple of seconds and confirm the reset of the respective light when prompted. Finally, turn off the car's instrument panel.


Posted on 15 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Trax 2013-2022 - What does code 82 mean on the Chevrolet Trax? Read Answer
    • Trax 2013-2022 - What does code 82 indicate in the Chevrolet Trax? Read Answer
    • Trax 2013-2022 - What does error 89 on Chevrolet Trax mean? Read Answer
    • Trax 2013-2022 - What does the 128 code in the Chevrolet Trax mean? Read Answer
    • Trax 2013-2022 - What does it mean when fault code 89 comes on on Chevrolet Trax ? Read Answer
    • Trax 2013-2022 - What does the Chevrolet Trax error code 82 mean? Read Answer

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos