Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the ECU on the Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Control unit

See other generations:
Video tutorial

To replace the ECU, follow this procedure: first, disconnect the negative and positive terminals of the battery. The ECU is located on the right side of the engine next to the battery.

First, disconnect the three electrical connectors by unlocking the clips with a screwdriver. Then, use a 10 mm spanner to unscrew the four securing nuts (two on the top and two on the bottom) that hold the ECU to the chassis.

Now the ECU will be free and can be extracted from the engine bay. Finally, take the new ECU, position it, and reverse all operations to reassemble the components.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to refill AdBlue on the Chevrolet Cruze
How to refill AdBlue on the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) In this short guide, we will see the instructions that will allow us to top up the AdBlue liquid of the Chevrolet Cruze. First, we open the rear hatc…
Disassemble the Key of a Chevrolet Cruze
Disassemble the Key of a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Is the battery of your Chevrolet Cruze key flat? Here’s how to open the key to change the battery. Open the metal key of the Cruze remote and, using …
Removing the Starter Motor on a Chevrolet Cruze
Removing the Starter Motor on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Is the starter motor on your Chevrolet Cruze not working anymore? Let's look at how to remove the starter motor on a Cruze. Open and lift the front b…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos