Do it yourself
Frequently asked questions about cars and motorcycles

How Does the Chevrolet City Express Navigation System Work?

Model: Chevrolet City Express MK 1 - Years: 2015, 2016, 2017, 2018
Part: Checks and maintenance

Video tutorial

If you are not familiar with it, you can use this video to learn all the functions and how to use the navigation system of the Chevrolet City Express. The author shows every detail of this tool starting from the beginning, specifically the "Map" and "Nav" buttons that are used to activate it. You will also learn how to set the destination address, choosing between voice input or the list of previous destinations, along with the various features of the navigation system.

For example, you can choose to display the map in 2D or 3D and whether or not to be guided by the voice during the trip, also selecting the volume of the voice.


Updated on 2 August 2026 by ScegliAuto


Related tutorials

Chevrolet City Express (2015-2018 / MK 1) Let's briefly go over the steps needed to remove and replace the rear brake shoes on a Chevrolet City Express. First, lift the vehicle at the rear an…
Chevrolet City Express (2015-2018 / MK 1) To replace the front brake pads on a Chevrolet City Express, lift the vehicle so that the corresponding front wheel does not touch the ground. Then, …
Chevrolet City Express (2015-2018 / MK 1) In today's video, you will learn how to replace the cabin air filter in a Chevrolet City Express. First, open the passenger side door. Next, open the…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos