Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Tavera
    4. : How to replace the rear brake pads of the Chevrolet Tavera.

Chevrolet Tavera - Video tutorial

Model: Chevrolet Tavera MK 1 - Years 2001-2017
Part: Drums and shoes
Operation: How to replace the rear brake pads of the Chevrolet Tavera.

In today's video tutorial, we will see instructions on how to disassemble and replace the rear brake pads of the Chevrolet Tavera, following these simple steps. Firstly, we lift the car and start to remove the rear wheel; then we remove the brake drum by unscrewing the fixing screws. At this point, we remove the brake pad springs, cleaning the brake system from dirt; we then install the new high-quality brake pads, checking that the drum is in excellent condition before reassembling the brake system!


Posted on 25 June 2023 by ScegliAuto

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos