Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Where are the windshield wiper relays located in the Chevrolet Equinox?

Model: Chevrolet Equinox MK 2 - Years 2010-2017
Part: Windscreen wipers

If the windshield wipers of our Chevrolet Equinox have suddenly stopped working and the corresponding fuses are intact, we can check the status of the respective relays whose location is indicated in this video. As shown, we find the relays in question in the box located inside the engine compartment, precisely below the plastic cover on the driver's side. They are the first ones in the center, when looking at the box from the front. In case of a faulty relay, make sure to use a replacement with equivalent specifications and operate with the vehicle turned off.


Posted on 12 December 2023 by ScegliAuto



How do i replace the wiper blades on the Chevrolet Equinox?
Chevrolet Equinox (2005-2009 / MK 1) In order to replace the wiper blades of the Chevrolet Equinox you have to lift the arms of the brushes, so that they are not in direct contact with t
How to replace the front wipers on Chevrolet Equinox 2
Chevrolet Equinox (2010-2017 / MK 2) Let's find out in this guide the step by step instructions to be able to remove and replace the front wipers of the Chevrolet Equinox second series.
How to replace the rear wiper blade on the Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) In order to replace the rear wiper blade of the Chevrolet Equinox it is necessary to loosen the internal fixing clips that secure the plastic cover p

How to set the time of the new Vespa 2023

In our new mini guide dedicated to your new Vespa 2023, we'll find out how to manually change the time displayed on the central console display. So first place your Vespa on the stand. Then insert the key and start the instrument cluster. At this point locate the "Mode" button on the right knob and hold it down for a few seconds. Release it as soon as the time on the panel starts flashing and press it several times to change both the hours and minutes digits. At the end, turn off the ignition and you are done.

Watch the video!


by ScegliAuto

More videos