Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Warning Light on the Grand Voyager

Model: Chrysler Grand Voyager - Years 1996-2000
Part: Warning light – error code

To reset the warning light on the Grand Voyager, use the buttons on the instrument panel. Turn on the ignition with the appropriate key (you will see the maintenance message), then turn off the ignition and press the button on the left. Turn the ignition back on and wait for the countdown (release the button when the seconds finish). Finally, turn off the ignition with the appropriate key, then turn it back on to check the maintenance performed (the warning light should no longer be illuminated). Perform the maintenance reset with the vehicle stationary and the engine off.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to convert the Chrysler Grand Voyager into a camper?
How to convert the Chrysler Grand Voyager into a camper?
Chrysler Grand Voyager (2001-2007 / MK 4) It can be said that the Chrysler Grand Voyager is well-suited for certain conversions, given its generous dimensions. Removing the rear seats allows …
How to Replace the Fuel Filter on the Chrysler Grand Voyager?
How to Replace the Fuel Filter on the Chrysler Grand Voyager?
Chrysler Grand Voyager (2001-2007 / MK 4) In this tutorial, you will see how to replace the fuel filter on the Chrysler Grand Voyager, a very simple operation. First, attach the water sensor …
Replacing and Repairing the Headlining of the Chrysler Grand Voyager
Replacing and Repairing the Headlining of the Chrysler Grand Voyager
Chrysler Grand Voyager (2001-2007 / MK 4) Today's guide will show you the steps to remove and replace the interior headlining or roof lining of the Chrysler Grand Voyager. First, remove all c…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos