Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing and Repairing the Headlining of the Chrysler Grand Voyager

Model: Chrysler Grand Voyager MK 4 - Years 2001-2007

Today's guide will show you the steps to remove and replace the interior headlining or roof lining of the Chrysler Grand Voyager. First, remove all components fixed to the roof of the vehicle; take off the sun visors by unscrewing the fixing screws, and remove all the plastic side pillars as illustrated in the video. Next, detach the seatbelt anchors and the interior light unit, releasing the headlining from the rear (from the boot area); remove it completely to carry out the repair or replacement.

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Fuse box and fuse positioning of the Chrysler Grand Voyager.
Fuse box and fuse positioning of the Chrysler Grand Voyager.
Chrysler Grand Voyager (2001-2007 / MK 4) These short and simple steps will show us how to access the fuse boxes of the Chrysler Grand Voyager. First, we get into the car and start unscrewing…
How to convert the Chrysler Grand Voyager into a camper?
How to convert the Chrysler Grand Voyager into a camper?
Chrysler Grand Voyager (2001-2007 / MK 4) It can be said that the Chrysler Grand Voyager is well-suited for certain conversions, given its generous dimensions. Removing the rear seats allows …
Fuse Layout and Diagram for the Chrysler Grand Voyager
Fuse Layout and Diagram for the Chrysler Grand Voyager
Chrysler Grand Voyager (2001-2007 / MK 4) Below, you will find the instructions that will allow you to identify the fuse boxes and their diagram for the Chrysler Grand Voyager, also known as …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos